Indivision AGA MK3/liveconfig

IndivisionAGAmk3 live configuration

• To enter live config mode, press left shift, CTRL and tilde key.
• Live config mode is indicated by a blueish parameter window that overlays the screen.
• To exit live config mode, press the tilde key.

In live config mode,

• you can pan the visible area by moving the mouse, and scale the visible area by moving the mouse while holding the left mouse button.
• press the X key to cycle through Indivision modes that match the current Amiga output parameters.
• Press the S key to change the currently selected output mode by changing the output scaling to integral numbers: Pressing this key will toggle between 1:1 and 1:2. To return to the saved mode, simply press the X key (multiple times if more than one mode applies). The S key can be used to return to a 'sane' zoom factor after it has been maladjusted with the mouse.

There can be more than one active Indivision modes that match the current criteria for Amiga screenmode detection. When searching the list from top to bottom, the first active Indivision mode matching the criteria will be used. If there are more matching modes down below in the list, these can be cycled through using the X key in live config mode.

After changes have been made in live configuration mode, you can start the IndivisionAGAmk3 config tool. It will ask you if you want to keep the new settings (which will allow to save them), or to revert to the last saved configuration.