Indivision ECS V4
The Indivision ECS V4 product is very similar to the Indivision_ECS_V3 and Indivision_AGA_MK3.
Like the Indivision AGA MK3, it features a live configuration and monitor display data (EDID) support.
Contents |
In-depth documentation and downloads
Indivision_ECS_V4/doc - Full documentation and download links
English instruction sheet as included with the product, but with high-res colour pictures.
Deutsche Kurzanleitung wie sie dem Produkt beiliegt, jedoch mit hochauflösenden, farbigen Bildern.
Installation pictures
Please make sure to have lots of light at the place where you work on your computer. Take your time when disassembling the machine - there's no point in doing things quickly, and then ending up with expensive repairs. Remember that Amiga computers are classic machines. Please treat them with respect. Do not cut holes into cases.
A600
The A600 version of Indivision ECS V4 comes with a different CIA adapter, which was originally developed for the AGA MK3 version. Please ignore what's written on the CIA adapter itself, only refer to this installation picture for the correct CIA chip and orientation. Please note that the cable is different from the cable that's used with the AGA MK3 version. Further, please note that as of the time of this publication, the core of Indivision ECS V4 does not support live config with an A600. The OSD will come up if you press the "magic key combination" left-ALT-CTRL-Tilde, but you won't be able to pan/zoom with the mouse. This will be implemented with one of the next updates. Further, you'll need the A604n memory expansion to actually have a place to insert the flicker fixer into. We only guarantee Indivision ECS V4 to work on iComp-made memory expansions. Do not use cheap copies.
Indivision ECS V4 in A600
A2000a Rev.4 (Braunschweig/A1000-based)
Indivision ECS V4 installed in A2000a
A2000 B-CR Rev.4.1 and Rev.4.3
These boards require moving capacitor C225 to a different location. Either replace it with a low-profile type, or use short wires (not more than 5cm/2inch) to re-locate the capacitor.
Electrolytic capacitor next to Paula chip
Electrolytic capacitor modified to lay flat on the board
Indivision ECS V4 installed in A2000 Rev.4.1
Detail view of Indivision ECS V4 with modified capacitor
A2000 B-CR Rev.6
Installed in A2000 Rev. 6
A3000
Remove the battery first
Indivision ECS V4 installed in A3000
A3000T
Installation in an A3000T requires an additional 48-pin socket to raise the flicker fixer above the video slot.
Prepare by adding a socket to raise Indivision ECS V4
Indivision ECS V4 installed in A3000T
CDTV
Indivision ECS V4 installed in CDTV
A1000 PAL/multilayer
This will only fit on boards without piggy back board. Requires the additional Paula-adapter.
Indivision A1000 adapter on Paula chip
Indivision ECS V4 installed in A1000
